Camera Covers
Click Below To See More
The ShooterSlicker® S5 Working Cover is designed for standard "HardCam" studio configurations using long 10x-70x box lenses. These covers are long enough to cover the tripod head and feature sleeves with windows for the camera op to see the controls. There are vents to allow air circulation and a water-resistant zipper at the front allows easy installation. The rear of the cover is designed to fit 7-10" or 10-14" Monitors and the clear panel opens for total view and access. The handy storage bag is sewn on so you can't lose it.
S7 Overnight Elephant Bags
ShooterSlicker® S7 Overnight/Elephant Bags are made of the same great fabric as our working covers. They are designed to fit generously over the top of your working covers. They go all the way to the ground and have a tie with cord locks and grommets at the bottom to secure the cover to your tripod.
As with all of our larger covers, the storage bag is securely sewn into the design so you can't lose it. Dimensions for overnight bags can vary based on your specifications. The basic version is 12" deep at the front by 65" wide by 14" deep at the back and 58" long. A rear vent rolls up to allow for airflow if you want it and a zipper makes the S7 cover easy to install. All our products are available in 5 Colors: Black, Navy, Silver Grey, Charcoal, or Masters Green and in either ripstop fabric or Cordura/Ballistic fabric (grey or black only).
NEW! S8 SMALL STUDIO OVERNIGHT / ELEPHANT COVER
This Cover is designed to work with the S10 working raincover and has all of the great features offered with the S7 Overnight cover. Zipper allows easy installation, attached bag prevents loosing it in a wind, D Ring for easier drying after your show.
S10 Small Studio
Camera Covers
The S10 Small Studio Camera Cover is made for use with ENG/EFP cameras with a smaller lens set-up with a 7-10” or 10-14” monitor and hand controls.
Designed with ample fabric over the rear viewfinder/monitor window, this cover will allow you to use a hood or scrim around it, yet still close it up to keep your equipment dry while working in a pouring rain.
It offers the same great features as the bigger S5 Studio Camera Cover, such as easy access to your viewfinder, vents at the back on both sides for heat and humidity control, ties and grommets at the bottom to allow you to secure the cover to your tripod.
It also offers overnight protection by allowing you to close the front velcro in front of the lens.
Removable, collapsible tent poles are supplied for support over your lens and fit in special long Velcro “pocket” sewn under the front lens area of the cover. The poles are in two parts and can be easily shortened for shorter lens configurations. You can’t loose the sewn on storage bag which also velcro’s neatly up and out of the way underneath the cover.
S1 ENG/EFP Camera Covers
ENG/EFP photographers are major contributors to the ShooterSlicker® Raincover design. This cover has a sleeve with a waterproof zipper for easy installation over the microphone and the front is available with velcro or a unique neoprene/webbing cuff that cinches around the lens shade. A rubber bushing allows easy access for a post to mount your light. Velcro lets you close the bottom of this cover around the camera when mounted on a tripod. This cover works great for locker room celebrations or Saharan Desert dust storms! We also offer custom sizes for added equipment at the back or sides and built in “antenna socks” to accommodate your wireless audio/video add-ons.
S4 Fiber/Triax Camera Cover
The S4 camera cover is designed for use in Fiber or Triax configurations. It can be made to accommodate all audio and video antenna add-ons and usually only has a window to see the battery power levels. This cover is our most simple design. The front has Velcro to close around your lens and you can also add a mic sleeve to this design.
Please be sure to let us know how your camera is configured when you order this cover. All our products are available in 5 Colors: Black, Navy, Silver Grey, Charcoal, or Masters Green.
S1 Modular Camera Cover
Sony FS7, FS5, FX6,FX9, F55, F3, Canon C200, C300, C400, C500+,
Alexa, Red, Arri, Blackmagic and Panasonic and others.
Designed with the newest modular camera configurations in mind, this amazing raincover can handle almost any camera you want put it on.
We offer up to 9 different pieces that all go together via waterproof zippers to cover your rig from the longest zoom lenses to the shortest prime lenses. The body of this cover has a removable eyepiece / viewfinder sleeve that allows you to use longer, larger, differently positioned eyepieces / viewfinders. There are other parts that allow you to adapt to added on media recorders, audio, video, batteries and adapt for cable pullers and extra monitors.
We also make a more simply designed “configurable” cover with a waterproof zipper at the back.
Pro-HD Prosumer
Product Flyer for More Information
ArcticSlicker Raincover
New to the already great collection of ShooterSlicker® Raincovers is the ArcticSlicker. Designed for the F3 Camera initially, this cover can be custom made to your camera and lenses. It is also available with our new and unique system of interchangeable lens coverings.
Waterproof zippers allow you to configure just the right lens covering, be it short or extra-long. Specially made with three layers of fabric, this cover features mesh pockets inside for heater packets to keep your camera and batteries warm and working! Two zippers across the top allow you to quickly put your camera into the cover. Velcro at the bottom allows you access to your tripod.
Contact us for further product details on our line of commercial camera gear. We are based in Marina del Rey California, and ship to all U.S. customers.